No Trouble Code Complete Test
WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Check Tech Service Bulletins (TSBs) for any pertinent information. If a TSB exists, perform corrective action. If TSB does not exist or if driveability problem still exists, perform tests NTC-2A through NTC-15A in sequence until driveability problem is found. See NO TROUBLE CODE TEST MENU table.
NO TROUBLE CODE TEST MENU
| Application | Test |
|---|---|
| Checking Secondary Ignition & Timing | NTC-2A |
| Checking Fuel Pressure | NTC-3A |
| Checking Coolant Sensor Calibration | NTC-4A |
| Checking TPS Calibration | NTC-5A |
| Checking MAP Sensor Calibration | NTC-6A |
| Checking Oxygen (O2) Sensor Switching | NTC-7A |
| Checking Idle Air Control Motor | NTC-8A |
| Checking Solenoid Operations | NTC-9A |
| Checking Park/Neutral Switch | NTC-10A |
| Checking PCM Grounds & Power Circuits | NTC-11A |
| Checking EGR System | NTC-12A |
| Checking Engine Vacuum | NTC-13A |
| Checking Minimum Idle Air Flow | NTC-14A |
| No Trouble Code Mechanical Test | NTC-15A |