LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1991 >> Value Van 7.4 N >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L V8 - VIN [H] >> Overhaul >> Fitting Pistons

Fitting Pistons

  1. Measure piston diameter at 90 degree angle to piston pin, on piston pin centerline. Measure cylinder bore diameter 2 1/2" below cylinder block deck. Determine piston clearance.
  2. If piston clearance is not within specification, replace piston and/or machine cylinder bore as necessary. See CYLINDER BLOCK  table and PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals