Piston/Pin/Ring Specifications
PISTONS, PINS & RINGS SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Piston Clearance | .0007-.0017 (.018-.043) | ||
| Pins | |||
| Diameter | .9269-.9271 (23.543-23.548) | ||
| Piston Fit | .0002-.0007 (.005-.018) | ||
| Rod Fit | .0008-.0016 (.020-.041) Interference | ||
| Rings | |||
| No. 1 | |||
| End Gap | .010-.020 (.25-.51) | ||
| Side Clearance | .001-.003 (.03-.08) | ||
| No. 2 | |||
| End Gap | .010-.025 (.25-.64) | ||
| Side Clearance | .001-.003 (.03-.08) | ||
| No. 3 (Oil) | |||
| End Gap | .015-.055 (.38-1.40) | ||
| Side Clearance | .002-.007 (.05-.18) | ||