Transmission Fluid Cooler - Air to Oil: Installation
- To install, reverse the removal procedure.
-
- Lubricate the transmission fluid cooler tube band seals and backing rings with clean transmission fluid.
Material
: Motorcraft® MERCON® ULV Automatic Transmission Fluid / XT-12-QULV (WSS-M2C949-A,) (MERCON® ULV)
- Position the transmission fluid cooler tube and install the bolts.
Torque
: 97 lb.in (11 Nm)
- Lubricate the transmission fluid cooler tube band seals and backing rings with clean transmission fluid.
- Check the transmission fluid level. Refer to: Transmission Fluid Level Check .