Pinpoint Test R : The Camera System Does Not Respond When The Camera Selection Switch Or On-Screen Button Is Pressed: Notes
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
IPMB DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B14A5:11 | Multi-Camera View Switch: Circuit Short To Ground | A continuous and on-demand DTC that sets in the IPMB when the camera selection switch is stuck closed or the switch circuit is shorted to ground. |
Possible Causes
- Communication network concern
- TR input concern
- Vehicle speed input concern
- Camera selection switch
- IPMB
- APIM concern (on-screen button only)
Visual Inspection and Diagnostic Pre-Checks
- Inspect the camera selection switch to verify that the switch is not damaged or stuck in the pressed position.