DTC P2020 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance (Bank 2)
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P2020 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT RANGE/PERFORMANCE (BANK 2)
| Description: | This DTC sets when the intake manifold runner control bank 2 (IMRC2) sensor signal is greater than, or less than, an expected calibrated value during self-test. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC2 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||