DTC P2017 - Intake Manifold Runner Position Sensor/Switch Circuit High (Bank 1)
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P2017 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT HIGH (BANK 1)
| Description: | This DTC sets when the intake manifold runner control bank 1 (IMRC1) sensor circuit voltage is greater than a calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC1 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||