Pinpoint Test E: DTC P06E4
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to ELECTRONIC ENGINE CONTROLS - 5.0L
for schematic and connector information.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P06E4:00 Control Module Wake-up Circuit Performance: No Sub Type Information This DTC sets when the PCM detects control module Wake-up circuit performance. Possible Sources
- PCM
- Wiring, terminals or connectors
- E1 RETRIEVE DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, perform PCM self-tests.
Is DTC P06E4 recorded?
Yes RETRIEVE and RECORD all CMDTCs. If BCMDTC C113A:11 or C113A:15 is found, GO to Pinpoint Test D Clear all Diagnostic Trouble Codes (DTCs). RERUN the PCM self-test. If the DTC returns, CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If no Technical Service Bulletins (TSBs) address this concern, refer to PCM GUIDED ROUTINE TESTING
Internet Explorer version 11 or greater is required to perform this Pinpoint Test.No The repair is completed.