Oil Cooler: Installation
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oil cooler and the retainer.
Torque: 43 lb.ft (58 Nm)
-
- Connect the coolant hoses.
- Remove the hose locking pliers. Use the General Equipment: Locking Pliers
- Install a new oil filter and fill the engine with clean engine oil. Refer to: Engine Oil Draining and Filling .
- Inspect and adjust the coolant level in the degas bottle. Refer to: Specifications .