LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 MHT (Diagnosis & Testing - Installation)) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - 3.5L V6 PowerBoost (CN) >> Pinpoint Tests >> Pinpoint Test Ai: P2700, P2701, P2702, P2703, P2704, 2705

Pinpoint Test Ai: P2700, P2701, P2702, P2703, P2704, 2705

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    The PCM monitors clutch applications. It sets a DTC if it detects a non-electrical fault that causes a clutch to fail to apply and/or release properly.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P2700:00 Transmission Friction Element "A" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0751 or P0752. Resolve the more specific DTC first.
    PCM P2701:00 Transmission Friction Element "B" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0756 or P0757. Resolve the more specific DTC first.
    PCM P2702:00 Transmission Friction Element "C" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0761 or P0762. Resolve the more specific DTC first.
    PCM P2703:00 Transmission Friction Element "D" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0766 or P0767. Resolve the more specific DTC first.
    PCM P2704:00 Transmission Friction Element "E" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0771 or P0772. Resolve the more specific DTC first.
    PCM P2705:00 Transmission Friction Element "F" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P2707 or P2708. Resolve the more specific DTC first.

    Possible Sources 

    • Clutch stuck on
    • Clutch stuck off
    • Clutch damaged

  2. AI1 CHECK THE PCM (POWERTRAIN CONTROL MODULE) FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, clear all diagnostic trouble codes (DTCs) from the PCM.

    • Road test the vehicle.

    • Using a diagnostic scan tool, retrieve all continuous memory diagnostic trouble codes (CMDTCs) from the PCM.

    Is DTCP2700, P2701, P2702, P2703, P2704 or P2705 present in the PCM? 

    Yes  For P2700, if either DTC P0751 or P0752 are set, resolve those first. Otherwise, check the A clutch for a slipping or a harsh apply condition. REFER to: A Clutch . For P2701, if either DTC P0756 or P0757 are set, resolve those first. Otherwise, check the B clutch for a slipping or a harsh apply condition. REFER to: B Clutch . For P2702, if either DTC P0761 or P0762 are set, resolve those first. Otherwise, check the C clutch for a slipping or a harsh apply condition. REFER to: C Clutch . For P2703, if either DTC P0766 or P0767 are set, resolve those first. Otherwise, check the D clutch for a slipping or a harsh apply condition. REFER to: D Clutch . For P2704, if either DTC P0771 or P0772 are set, resolve those first. Otherwise, check the E clutch for a slipping or a harsh apply condition. REFER to: E Clutch . For P2705, if either DTC P2707 or P2708 are set, resolve those first. Otherwise, check the F clutch for a slipping or a harsh apply condition. REFER to: F Clutch .
    No  The fault is not present at this time and may be intermittent.