Pinpoint Test W: U0404:86
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Lane Keeping System - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMA U0404:86 Invalid Data Received from Gear Shift Control Module A: Signal Invalid This continuous memory DTC can set in IPMA through GWM due to a fault in the GSM or an invalid input from the GSM. Possible Sources
- GSM
- GWM
- IPMA
- W1 CHECK FOR GSM SIGNAL
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs) for the module in question.
Is DTC U0404:86 still present?
Yes RETRIEVE and FOLLOW non-network Diagnostic Trouble Codes (DTCs) from the GSM. REFER to: External Controls - Vehicles With: Column Shift . REFER to: External Controls - Vehicles With: Console Shift . REFER to: External Controls - Vehicles With: Column Shift . REFER to: External Controls - Vehicles With: Console Shift . No DIAGNOSE the observable symptom.