Pinpoint Test Ac: DTC: U2100:00
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to Wiring Diagrams MEMORY SEATS
for schematic and connector information.
Normal Operation and Fault Conditions
Using a diagnostic scan tool, CARRY OUT PMI on the DSM. REPEAT the self-test and VERIFY successful PMI. CLEAR the Diagnostic Trouble Codes (DTCs). REFER to: Front Seats - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition DSM U2100:00 Initial Configuration Not Complete: No Sub Type Information This DTC indicates PMI has not been done to a newly installed module or configuration data has been lost. Possible Sources
- PMI has not been done to a newly installed module or configuration data has been lost.
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods