LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 397 (Starting System - 3.3L DURATEC-V6) >> Diagnosis And Testing >> Starting System >> Pinpoint Test(s) >> Pinpoint Test D: DTC P06E4

Pinpoint Test D: DTC P06E4

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Electronic Engine Controls - 3.3L TIVCT for schematic and connector information.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Condition
PCM P06E4:00 Control Module Wake-up Circuit Performance: No Sub Type Information This DTC sets when the PCM detects control module Wake-up circuit performance.

Possible Sources 

  1. D1 RETRIEVE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.
    • Using a diagnostic scan tool, perform PCM self-tests.

    Is DTC P06E4 recorded? 

    Yes RETRIEVE and RECORD all CMDTCs. If BCM DTC C113A:11 or C113A:15 is found, CLEAR all Diagnostic Trouble Codes (DTCs). RERUN the PCM self-test. If the DTC returns, CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If no Technical Service Bulletins (TSBs) address this concern, Refer to PCM Guided Routine Testing
    No The repair is completed.