LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Instrumentation, Message Center And Warning Chimes (2 Of 2)) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test S : The Brake Warning Indicator Is Always On >> Notes

Pinpoint Test S : The Brake Warning Indicator Is Always On: Notes

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Instrument Cluster for schematic and connector information.

Normal Operation and Fault Conditions 

See Brake Warning Indicator, ABS/Brake/Stability-Traction Control System Indication descriptions and see Brake Fluid Level Switch component description. REFER to: Instrument Panel Cluster (IPC) - System Operation and Component Description .

If the brake (red) warning indicator request, parking brake warning indicator request, red brake warning indicator request or electronic park brake (red) indicator request messages are missing for 5 seconds longer, the IPC defaults the brake warning indicator on.

BCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1048:01 Brake Fluid Level Switch: General Electrical Failure A continuous and on-demand DTC that sets in the BCM when the BCM detects an open on the brake fluid level switch input.
B1048:7B Brake Fluid Level Switch: Low Fluid Level An on-demand DTC that sets in the BCM if the BCM detects a low brake fluid level input from the brake fluid level switch.
C1D00:11 Park Brake Apply Switch: Circuit Short To Ground An on-demand DTC that sets in the BCM if the BCM detects a short to ground on the parking brake input circuit.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Inspect the: