Pinpoint Test Al : The Stability-Traction Control Indicator (Sliding Car Icon) Is Never Or Always On: Notes
Normal Operation and Fault Conditions
See Stability-Traction Control Indicator (Sliding Car Icon). REFER to: Instrument Panel Cluster (IPC) - System Operation and Component Description .
See Stability-Traction Control RTT (Sliding Car Icon). REFER to: Message Center - System Operation and Component Description .
If the stability-traction control indicator request is missing or invalid for less than 5 seconds, the IPC defaults the stability-traction control indicator or stability-traction control RTT (sliding car icon) to the last indication state (on or off), based upon the last message received.
If the IPC does not receive the stability-traction control indicator request for 5 seconds or longer, the IPC defaults the stability-traction control indicator or stability-traction control RTT (sliding car icon) on.
Possible Sources
- Communication concern
- Message center concern
- Stability-traction control system concern
- GWM concern
- IPC