Pinpoint Test AU : The Off Road And Powertrain Distribution Display Is Inoperative: Notes
Normal Operation and Fault Conditions
See Powertrain Distribution Display. REFER to: Message Center - System Operation and Component Description .
If the 4WD data, gear lever position, wheel torque or vehicle speed messages are missing for less than 5 seconds, the IPC defaults the display fill area in front of the front wheels and behind the rear wheels to the last setting based upon the last message received.
If the 4WD data, gear lever position, wheel torque or vehicle speed messages are missing for 5 seconds or longer, the IPC defaults the display fill area in front of the front wheels and behind the rear wheels off.
If the vehicle roll angle display or vehicle pitch angle display messages are missing for less than 5 seconds, the IPC defaults the roll and pitch display to the last display based on the last data received.
If the vehicle roll angle display or vehicle pitch angle display messages are missing for 5 seconds or longer, the IPC defaults the roll and pitch display to 0 with the text display blank
Possible Sources
- Communication concern
- ABS module concern
- GWM concern
- PCM concern
- TCCM concern
- IPC