Pinpoint Test B: Both Front Power Windows Are Inoperative
- Refer to POWER WINDOWS
for schematic and connector information.
Normal Operation and Fault Conditions
Possible Sources
- Fuse
- Wiring, terminals or connectors
- Master window control switch
- B1 CHECK FOR VOLTAGE TO THE MASTER WINDOW CONTROL SWITCH
- Ignition OFF.
- Disconnect: Master Window Control Switch C504B.
- Ignition ON.
- Measure:
Positive Lead Measurement / Action Negative Lead C504B-6 Ground
Is the voltage greater than 11 volts?
Yes GO to B2 No REPAIR the circuit. - B2 CHECK THE MASTER WINDOW CONTROL SWITCH GROUND CIRCUIT FOR AN OPEN
- Ignition OFF.
- Measure:
Positive Lead Measurement / Action Negative Lead C504B-2 Ground
Is the resistance less than 3 ohms?
Yes INSTALL a new master window control switch. REFER to: Front Door Window Control Switch . No REPAIR the circuit.