Pinpoint Test A: B143A:11: Notes
Refer to Supplemental Restraint System for schematic and connector information.
Normal Operation and Fault Conditions
The BCM receives an event notification signal which communicates crash status and SRS deployment status to the PCM. When the PCM receives this event notification signal it initiates fuel cut-off.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B143A:11 | Crash Event Detection Output: Circuit Short To Ground | A continuous memory DTC that sets in the BCM if the BCM senses a short to ground on the event notification signal circuit to the PCM. |
Possible Sources
- Wiring, terminals or connectors
- PCM
- BCM