Selector Shaft - 5.0L Ti-VCT V8 (308kW/418PS): Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	205-153 (T80T-4000-W) Handle
Courtesy of FORD MOTOR COMPANY	307-003 (T57L-500-B) Holding Fixture, Transmission
Courtesy of FORD MOTOR COMPANY	308-808 Installer, Rear Flange TKIT-2010A-F TKIT-2010A-LM TKIT-2010A-ROW
Courtesy of FORD MOTOR COMPANY	308-809 Installer, Syncro Gear Pack TKIT-2010A-ROW
Courtesy of FORD MOTOR COMPANY	308-810 Remover, Syncro Gear Pack TKIT-2010A-F TKIT-2010A-LM TKIT-2010A-ROW
Courtesy of FORD MOTOR COMPANY	308-811 Installer, Rear Seal TKIT-2010A-F TKIT-2010A-LM TKIT-2010A-ROW
Courtesy of FORD MOTOR COMPANY	308-812 Remover, Detent TKIT-2010A-F TKIT-2010A-LM TKIT-2010A-ROW
Courtesy of FORD MOTOR COMPANY	308-938 Remover/Installer, Companion Flange Nut TKIT-2014D-ROW2 TKIT-2014D-FL_ROW
Slide Hammer
Three Leg Puller
Two Leg Puller

Materials

Name	Specification
Motorcraft® Threadlock 262 TA-26	WSK-M2G351-A6
Motorcraft® Gasket Maker TA-16	WSK-M2G348-A5