LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Manual Transmission - 6-Speed Manual Transmission - Mt82) >> Removal And Installation >> Output Shaft Speed (OSS) Sensor - 2.3L EcoBoost (231kW/314PS)/2.3L EcoBoost (257kW/350PS) - MI4 >> Removal

Output Shaft Speed (OSS) Sensor - 2.3L EcoBoost (231kW/314PS)/2.3L EcoBoost (257kW/350PS) - MI4: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the drain plug and drain the transmission fluid.

    Torque: 26 lb.ft (35 Nm)

    GFD719216Courtesy of FORD MOTOR COMPANY
  3. Disconnect the OSS electrical connector.
    GFD719293Courtesy of FORD MOTOR COMPANY
  4. Remove the OSS bolt and the OSS.
GFD719294Courtesy of FORD MOTOR COMPANY