LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Automatic Transmission - 7-Speed Automatic Transmission - Tr9070 (Diagnosis And Testing, General Procedures, Removal And Installation)) >> Removal And Installation >> Input Shaft Seal >> Removal

Input Shaft Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to: Transmission 
  2. Using the special tool, remove and discard the input shaft seal. Use Special Service Tool: 308-375 Remover, Input Shaft Seal. Use the General Equipment: Slide Hammer
GFD718930Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals