LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Mustang Mach 1 Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Automatic Transmission - 7-Speed Automatic Transmission - Tr9070 (Diagnosis And Testing, General Procedures, Removal And Installation)) >> Removal And Installation >> Input Shaft Seal >> Installation

Input Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tools, install a new input shaft seal. Use Special Service Tool: 307-778 Installer, Input Shaft Seal, 205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft.
    GFD718931Courtesy of FORD MOTOR COMPANY
  2. Install the Transmission. Refer to: Transmission 
scientia non olet · About LEMON Manuals