Pinpoint Test D: External Fluid Leaks

WARNING: This page is about a different variant/trim than selected.

Normal Operation and Fault Conditions
- Seals or gaskets
  - Inspect the transmission for leaks.
  - Refer to the appropriate Removal And Installation procedure for serviceable seals. If the seal or component is serviceable, INSTALL new components as necessary.
  - If the seal or component is not serviceable, INSTALL a new transmission. REFER to: Transmission
- Transmission cooling system
  - Inspect the transmission cooling system for leaks. REFER to: Transmission Cooling
Possible Sources
- Seals
- Gaskets
- Transmission cooling system
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods