(4A) Operation

When (4A) is selected on the ATCM, the 4WD system provides electronically controlled four-wheel drive with power delivered to all four wheels, as required, for increased traction. (4A) is appropriate for all on-road driving conditions, such as dry road surfaces, wet pavement, light snow or gravel. Shifts from (2H) or (4H) to (4A) can be made at any speed. In (4A):

• The ATCM sends a (4A) mode status to the AWD module via the GWM.
• The shift motor positions the ball ramp device at the clutch kiss point when driving conditions do not require 4WD.
• The shift motor positions the ball ramp device to apply the clutch when wheel slip is anticipated or detected.
• The reduction sleeve connects the input shaft and output shaft
• (4A) is displayed in the message center.