LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Electric Powertrain Control - 3.3L DURATEC-V6 - Hybrid (BP) (2 Of 2) >> Removal And Installation >> Inverter System Controller [SOBDMC] >> Installation

Inverter System Controller [SOBDMC]: Installation

  1. To install, reverse the removal procedure.
  2. Fill the Electric Powertrain Cooling System. Refer to: Cooling System Filling and Bleeding .
  3. NOTE: This step is only necessary when installing a new component.

    If the inverter system controller was replaced, upload the information from the diagnostic tool to the inverter system controller [SOBDMC] using the Programmable Modules Installation routine. Refer to: Module Programming .

  4. NOTE: This step is only necessary when installing a new component.

    Perform the PATS module initialization procedure. Refer to: Anti-Theft Key Programming - Scan Tool .

  5. NOTE: This step is only necessary if the PMI routine was completed using as-built data.

    Using the scan tool, Perform the Transmission Strategy Download. Refer to: Transmission Strategy Download .

scientia non olet · About LEMON Manuals