LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Electronic Engine Controls - 3.3L DURATEC-V6 3.3L DURATEC-V6 - Hybrid (BP)) >> Removal And Installation >> Oil Pressure Control Solenoid >> Removal

Oil Pressure Control Solenoid: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the engine front cover. Refer to: Engine Front Cover .
  2. Remove oil pressure control solenoid.

    Torque: 71 lb.in (8 Nm)

GFD513955Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals