LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 728 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 (2 Of 2)) >> Removal And Installation >> Output Shaft Seal >> Removal

Output Shaft Seal: Removal

WARNING: This page is about a different car, the 2021 Ford Police Interceptor Utility. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the transfer case assembly. Refer to: Transfer Case .
  3. Using the special tools, remove and discard the output shaft seal (7052). Use Special Service Tool: 100-001 (T50T-100-A) Slide Hammer., 307-309 Remover, Torque Converter Seal.
GFD514243Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals