Pinpoint Test H: The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed: Notes
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
Refer to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129E:13 | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Circuit Open | A continuous DTC that sets in the PAM when the PAM detects a stuck open in the active park assist switch input circuit. |
| B129E:9E | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Stuck On | A continuous DTC that sets in the PAM when the PAM detects a short to ground in the active park assist switch input circuit. |
Possible Causes
- Wiring, terminals or connectors
- Active park assist switch
- PAM