Pinpoint Test I: B1B36:14, B1B38:14, B1B40:14, B1B42:14: Notes
B1B36:14, B1B38:14, B1B40:14, B1B42:14
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:14 | Right Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the RHF outer parking aid sensor circuits are open, or the sensor signal line is shorted to ground. |
| B1B38:14 | Right Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the RHF inner parking aid sensor circuits are open, or the sensor signal line is shorted to ground. |
| B1B40:14 | Left Front Outer Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the LHF outer parking aid sensor circuits are open, or the sensor signal line is shorted to ground. |
| B1B42:14 | Left Front Inner Sensor: Circuit Short To Ground Or Open | A continuous and on-demand DTC that sets when any of the LHF inner parking aid sensor circuits are open, or the sensor signal line is shorted to ground. |
Possible Sources
- Wiring, terminals or connectors
- Front parking aid sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting the BCM or any of the parking aid sensors, verify the connectors are properly seated and latched.