Pinpoint Test C : B1305:13: Notes
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operations and Fault Conditions
REFER to: Perimeter Anti-Theft Alarm.
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1305:01 | Hood Switch: General Electrical Failure | Sets when the BCM detects an open from the hood ajar switch input during a self-test. |
Possible Sources
- Wiring, terminals or connectors
- Hood latch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the hood latch for damage.