Pinpoint Test N : The Luggage Compartment Lid Latch Release Is Inoperative: Notes
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operations and Fault Conditions
REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1219:11 | Interior Boot/Trunk Release Switch: Circuit Short To Ground | Sets when the BCM detects a short to ground from the luggage compartment lid release input circuit. |
| B12EE:11 | Liftgate/Tailgate/Trunk Release: Circuit Short To Ground | Sets when the BCM detects a short to ground from luggage compartment lid release output circuit. |
| B12EE:15 | Liftgate/Tailgate/Trunk Release: Circuit Short To Battery or Open | Sets when the BCM detects an open from luggage compartment lid release output circuit. |
| C1017:11 | Boot/Trunk Primary Switch: Circuit Short To Ground | Sets when the BCM detects a short to ground from the luggage compartment lid release input circuit. |
Possible Causes
- Fuse
- Wiring, terminals or connectors
- Interior luggage compartment lid release switch
- Exterior luggage compartment lid release switch
- Luggage compartment lid latch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the luggage compartment lid release switch for damage.
- Inspect the BCM fuse 16 (15A) and make sure it is OK.