DTC U2110 - Throttle/Pedal Position Sensor/Switch A Communication Circuit High

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION U2110 - THROTTLE/PEDAL POSITION SENSOR/SWITCH A COMMUNICATION CIRCUIT HIGH

Description:	This DTC sets when the electronic throttle control (ETC) throttle position (TP) signal is too high.
Possible Causes:	TP circuit open TP circuit short to voltage TP circuit short to VREF ETCRTN circuit open Damaged TP sensor
Diagnostic Aids:	This concern exhibits a symptom of limited power.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DV .