DTC U0422 - Invalid Data Received From Body Control Module

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION U0422 - INVALID DATA RECEIVED FROM BODY CONTROL MODULE

Description:	Network DTC concerns occur during module to module communication.
Possible Causes:	Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern. Missing message network concerns - missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.
Diagnostic Aids:	Check for all other module DTCs or related symptoms. Diagnose all other module DTCs before diagnosing this DTC. Reprogram the BCM, instrument cluster, and PCM using as built data. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming The VID Block For A Replacement PCM, to reprogram the PCM.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.