LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 76 (Engine Controls - Powertrain DTC Descriptions (Except Diesel & Hybrid) - DTC P2163 - P3404, DTC PXXXX, DTC U0046 - U300C, DTC UXXXX) >> DTC U0300 - Internal Control Module Software Incompatibility

DTC U0300 - Internal Control Module Software Incompatibility

WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION U0300 - INTERNAL CONTROL MODULE SOFTWARE INCOMPATIBILITY

Description:  The electronic throttle control (ETC) system uses multiple microprocessors within the PCM, each having its own software level and function. The microprocessors must have the correct level of software in order to communicate and function together. This DTC sets when there are incompatible software levels within the PCM that control the ETC system.
Possible Causes: 
  • Software incompatibility issue
  • Module programming error
Diagnostic Aids:  Verify the PCM is at the latest calibration level.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QE .