DTC P2ABE - Turbocharger/Supercharger Wastegate Actuator B Driver Current/Temperature Too High

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P2ABE - TURBOCHARGER/SUPERCHARGER WASTEGATE ACTUATOR B DRIVER CURRENT/TEMPERATURE TOO HIGH

Description:	This DTC sets when the turbocharger wastegate motor 2 driver current is greater than a calibrated threshold.
Possible Causes:	TCWGM2+ circuit short to ground TCWGM2- circuit short to ground Turbocharger wastegate motor 2 shorted internally
Diagnostic Aids:	Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HN .