DTC P2AB9 - Wastegate Position Sensor A Circuit High

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P2AB9 - WASTEGATE POSITION SENSOR A CIRCUIT HIGH

Description:	This DTC sets when the turbocharger wastegate position sensor is out of self-test range high.
Possible Causes:	Damaged or restricted wastegate motor linkage TCWP circuit open TCWP circuit short to voltage Damaged turbocharger wastegate position sensor
Diagnostic Aids:	Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HN .