DTC P2AB7 - Wastegate Position Sensor A Circuit
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2AB7 - WASTEGATE POSITION SENSOR A CIRCUIT
| Description: | This DTC sets when the TCWP circuit voltage is greater than or less than a calibrated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HN . | ||