DTC P26C4 - Internal Control Module Clutch Pedal Performance
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P26C4 - INTERNAL CONTROL MODULE CLUTCH PEDAL PERFORMANCE
| Description: | This DTC sets when the PCM detects a concern with the clutch pedal position (CPP) sensor signal. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC may be accompanied by other DTCs. Diagnose all other clutch pedal position (CPP) sensor DTCs first. If no other CPP sensor related DTCs are present, continue to follow diagnosis for this DTC. This DTC is a functional check of the CPP sensor input for the auto start stop system. Refer to POWERTRAIN CONTROL SOFTWARE , Auto Start Stop for additional information. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST TA . | ||