DTC P260F - EVAP System Monitoring Processor Performance
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P260F - EVAP SYSTEM MONITORING PROCESSOR PERFORMANCE
| Description: | This DTC sets when a concern is detected internal to the PCM. The microprocessor that controls the engine off natural vacuum (EONV) leak check monitor is separate from the main processor within the PCM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the PCM is at the latest calibration level. Reprogram if necessary. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HX . | ||