DTC P24C0 - EVAP System Leak Detection Pump Vacuum Switching Valve Stuck On
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P24C0 - EVAP SYSTEM LEAK DETECTION PUMP VACUUM SWITCHING VALVE STUCK ON
| Description: | This DTC sets when the evaporative emission (EVAP) leak detection control module switching valve is stuck closed. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HX . | ||