DTC P2418 - EVAP System Switching Valve Control Circuit/Open
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2418 - EVAP SYSTEM SWITCHING VALVE CONTROL CIRCUIT/OPEN
| Description: | This DTC sets when the signal moves outside the minimum or maximum limit for the commanded state of the evaporative emission (EVAP) vapor blocking valve. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HX . | ||