LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 76 (Engine Controls - Powertrain DTC Descriptions (Except Diesel & Hybrid) - DTC P2163 - P3404, DTC PXXXX, DTC U0046 - U300C, DTC UXXXX) >> DTC P2300 - Ignition Coil A Primary Control Circuit High

DTC P2300 - Ignition Coil A Primary Control Circuit High

WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2300 - IGNITION COIL A PRIMARY CONTROL CIRCUIT HIGH

Description:  This DTC sets when there is a short to voltage in the COP (COP) circuit.
Possible Causes: 
  • COP circuit short to voltage
  • Damaged COP
  • Damaged ignition coil wiring harness
Diagnostic Aids:  On some vehicles, when the COP circuit is shorted to voltage, the PCM will disable the COP until the concern is no longer present.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST JF .