DTC P2176 - Throttle Actuator A Control System - Idle Position Not Learned
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2176 - THROTTLE ACTUATOR A CONTROL SYSTEM AND IDLE POSITION NOT LEARNED
| Description: | This DTC sets when the PCM is unable to learn the calibrated throttle positions. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC may be accompanied by other DTCs. Diagnose other DTCs first. A TAC motor circuit PID reading may indicate a concern, if available. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DV. | ||