DTC P2163 - Throttle/Pedal Position Sensor A Maximum Stop Performance

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P2163 - THROTTLE/PEDAL POSITION SENSOR A MAXIMUM STOP PERFORMANCE

Description:	This DTC sets when the throttle plate does not reach the upper mechanical stop position within a calibrated amount of time.
Possible Causes:	Obstruction in the throttle plate movement Damaged electronic throttle body (ETB)
Diagnostic Aids:	Visually inspect the throttle plate for an obstruction.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DV .