DTC P2091 - B Camshaft Position Actuator Control Circuit High (Bank 1)

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P2091 - B CAMSHAFT POSITION ACTUATOR CONTROL CIRCUIT HIGH (BANK 1)

Description:	This DTC sets when high voltage on the VCT12 circuit exceeds a calibrated limit for a calibrated amount of time.
Possible Causes:	VCT12 circuit open VCT12 circuit short to voltage VPWR circuit open Damaged variable camshaft timing bank 1 solenoid 2 (VCT12)
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HK .