DTC P2089 - A Camshaft Position Actuator Control Circuit High (Bank 1)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2089 - A CAMSHAFT POSITION ACTUATOR CONTROL CIRCUIT HIGH (BANK 1)
| Description: | This DTC sets when a high voltage on the VCT11 circuit exceeds a calibrated limit for a calibrated amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HK . | ||