DTC P2016 - Intake Manifold Runner Position Sensor/Switch Circuit Low (Bank 1)
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P2016 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT LOW (BANK 1)
| Description: | This DTC sets when the intake manifold runner control bank 1 (IMRC1) sensor circuit voltage is less than a calibrated value. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC1 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||