DTC P2006 - Intake Manifold Runner Control Stuck Closed (Bank 1)

WARNING: This page is about a different variant/trim than selected.

DTC DESCRIPTION P2006 - INTAKE MANIFOLD RUNNER CONTROL STUCK CLOSED (BANK 1)

Description:	This DTC sets when the intake manifold runner control (IMRC) is commanded open and the intake manifold runner control bank 1 (IMRC1) sensor indicates the IMRC is closed.
Possible Causes:	IMRC circuit open IMRC1 circuit open IMRC1 circuit short to voltage Damaged IMRC actuator Damaged IMRC solenoid
Diagnostic Aids:	The IMRC1 sensor value should change when the IMRC is commanded open or closed.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HU .