DTC P1935 - Brake Switch/Sensor Signal
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P1935 - BRAKE SWITCH/SENSOR SIGNAL
| Description: | The PCM continuously monitors the controller area network (CAN) for messages from the anti-lock brake system (ABS) module. This DTC sets when the PCM does not receive the ABS message within the defined amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for other ABS DTCs or ABS related symptoms. Diagnose all other ABS DTCs or ABS related symptoms first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST QA . | ||