DTC P1639 - Vehicle ID Block Corrupted, Not Programmed
WARNING: This page is about a different variant/trim than selected.
DTC DESCRIPTION P1639 - VEHICLE ID BLOCK CORRUPTED, NOT PROGRAMMED
| Description: | This DTC sets when the VID block is not programmed or the information within is corrupt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Program the PCM to the most recent calibration available. The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Making Changes to the VID Block. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||